Frits and glazes

Our clays have been specifically designed for use in both Vitreous China (porcelain) and Fine fire clay (stoneware), and for both traditional and medium-high pressure casting systems.

These are special clays whose components have been specifically selected for use in the sector and which undergo an industrial process of mixing, washing, sieving, filter-pressing and drying.

Thus, homogeneity is fully guaranteed both in terms of chemical-mineralogical composition and granulometric level.

The product is normally offered in macaron form with a maximum moisture content of 12%. Lean, medium and high plasticity clays are available, characterized by the following grain size distribution:

  • 40-43% < 0.5 µ
  • 84-86% < 10,0 µ

The mineralogical-granulometric characteristics allow our clays a good thickness formation accompanied by optimal drainage times.

All have an excellent “workability” and breaking loads between 60 and 120kg/cm2.

Production centers:
ZARAGOZA

Sectors:
Range of products for the healthcare sector.

Sanitary pastes

Pastes for flat ceramics

Kaolins

Sands

Feldspars

Clays

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.